成人VR视频

成人VR视频.CA / Faculty of Engineering / Faculty & Staff / Services & Resources / Faculty Workshop Services / Information and Services

Safety Rules & Regulations

Objectives

One of the Faculty workshop objectives is to have and maintain its clean records of no work related injuries. The workshop considers that the most important aspect of its operation or administration is the health and safety of its employees, students and users. This is achieved by maintaining safe working methods and healthy working conditions, by developing and promoting a culture focused on awareness, open communication, safety education and supervision.

The workshop, with the help of Environmental Health and Safety Department (EHS) at 成人VR视频 and with the help of external safety consultants, meets the requirement of the Commission des normes, de l'茅quit茅, de la sant茅 et de la s茅curit茅 du travail . CNESST was satisfied with the machine guarding arrangements.

The Faculty Workshop Safety Committee (WSC) oversees all safety aspects related to the workshop, staff, students and users. The committee members represent all employees, technicians, management, academic members and students.

This is a 鈥淪afety First鈥� environment. All shop users must wear safety glasses, their feet must be fully covered by safety boots (or the toe guard) with socks, long hair must be tucked back with elastic bands or clips, shorts or short skirts and loose clothing are forbidden. Watches, bracelets, rings and dangling necklaces must be removed during machining operations. The shop is supervised at all times during the posted hours of operation.

Workshop Orientation and Safety Session

Shop users receive orientation; they are shown the layout of the machine shop, identification of all the machinery, cutting tools, measuring instruments, hand tools, First Aid Kit, and Eye Wash Station. Brief explanations as to how the machines are used. Focus is on safety and working safely. This orientation is usually delivered to students enrolled in MECH201.

General Workshop Safety Rules

  • All users must have adequate training
  • All users must report all safety concerns to a supervising technician
  • No user shall work alone in any work space 鈥� No horseplay, contests or feats of strength are permitted
  • Personal Protective Equipment (PPE) is required
    • Safety glasses must be worn at all times
    • Long pants must be worn in all shops, labs and workspaces. No shorts or skirts.
    • Appropriate footwear must be worn in all workshop areas"
      • Closed-toe shoes in all cases with socks - No flip flops or open toe shoes
      • Certified steel toe shoes or approved slip on safety toe caps must be worn in MTL (machine shop) at all times and in all other areas whenever a foot injury hazard is present
    • Additional PPE must be used as required by the situation
    • Additional PPE must be worn by all users present

Housekeeping Rules

  • All resources will be in as good or better condition than when found by each user
  • All tools and work areas must be clean and tidy at all times
  • No mess will be left overnight o Untidy working conditions will be met with a "stop work" order until the area has been tidied up
  • No tools will be removed from any work area o All tools must be returned to original location after each use
  • All materials brought into the space must be removed - Do not leave scraps behind
  • All machinery must be cleaned after each use

Charge rates and method of billing

One rate across 成人VR视频 - No extra charge for non-engineering jobs IF machines and technicians are available - Extra charge for the use of SPECIALIZED equipment such as

  • CNC 3 axis Lathe and milling machines.
  • CNC 5 axis machine
  • CNC router machine
  • Laser cutter machine
  • Coordinate measuring machine聽(CMM).
  • Prototype machine

Workshop RATES

  • Technician Rate for conventional equipment services:聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 $45.00/hr.
  • Technician Rate for specialized equipment services:聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 $60.00/hr.
  • Use of equipment by non-technician:聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 $30.00/hr.

The workshop provides services for external clients at the following rates:

  • Technician Rate for conventional equipment services:聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 $80.00/hr.
  • Technician Rate for specialized equipment services:聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 $95.00/hr.
Back to top